Main Page

General Information

• Constants: Setting and Updating
• Cplot Graphical Analysis Program
• Copyright Notice (COPYING)
• Creations of Wiki Page Accounts
• IDL Wrapper Code
• Installing, Updating, and Committing (Developers) ADPAA (INSTALL)
• M300 Tag Number Standard Definitions
• Scripts (Project and Flight Processing, Analysis Tools)

Files

• Data file extension hierarchy (from bottom to top)
  • Raw Data Files - NASA/UND ASCII Format (*.raw)
  • Chronological files - NASA/UND ASCII Format (*.chron)
  • Synchronous Files - NASA/UND ASCII Format (*.sync)
  • Edited Files - NASA/UND ASCII Format (*.flt, *.edits)
  • Clean Files - NASA/UND ASCII Format (*.clean)
• Image files
  • Image Files (*.2dc, *.cip, *.pip)
• netCDF Files
  • netCDF Files

Guides and Tutorials

• Programming Guide

Instrument Processing Streams

Gives the overall flow of the processing code per instrument and not step-by-step instructions as to how the data is processed. For step-by-step instructions, see the processing code itself.

Atmospheric Winds (AIMMS Probe - USB Stick)

• AIMMS Probe (USB Data System)

• Use this process to generate Google Earth flight paths from USB AIMMS Probe data.

• Last edited 8/03/2017 - Shawn Wagner [shawn.wagner@und.edu]

1. Concatenate all ".A##" files into one ".aim" file using linux command "cat".

   Example: Entering "cat 12091440.A0 12091440.A01 >12091440.aim" into the terminal produces an aim file for 12091440.

2. Convert the ".aim" file from step 1 into a file of the correct format using ADPAA command "convert_aimmstonasa file=*inputfile*.aim".

   Example: Entering "convert_aimmstonasa file=12091440.aim" into the terminal produces the file "97_12_09_14_40_07.aimms.realtime_usb.raw".

3. Convert file generated in step 2 into kml format using ADPAA command "convert2kml < *inputfile* > *outputfile*".

   Example: Entering "convert2kml < 97_12_09_14_40_07.aimms.realtime_usb.raw > 97_12_09_14_40_07.aimms.realtime_usb.kml" into the terminal produces the file "97_12_09_14_40_07.aimms.realtime_usb.kml".

4. The file produced in step 3 may now be loaded into Google Earth.

Atmospheric Winds (M300 - Citation Research Aircraft)

• Aircraft Processing (M300 Data System)

Cloud Condensation Nuclei Counter (DMT)

• Aircraft Processing (M300 Data System)
• Surface Processing (Processing Data Directly from Instrument)

Cloud Condensation Nuclei Counter (UWyo)

• Lab Processing (Processing Data using M200 Data System)
• Lab Processing (Processing Data using A/D Board)

Cloud Droplet Probe (CDP)

• Lab Processing (Processing Data using Stream Data)

Cloud Particle Imager (CIP) and DMT's Image Playback and OASIS Software

• Using SEA M300 recorded CIP Data with DMT Software

Passive Cavity Aerosol Spectromoter Probe (PCASP) Processing

• PCASP Processing

Scanning Mobility Particle Sizer (SMPS) Spectrometer (TSI)

• SMPS Processing

Temperature Probe (Rosemount)

• Aircraft Processing (M300 Data System)

True Air Speed (TAS) Processing

• TAS Processing

Tunable Diode Laser Hygrometer (TDL)

• TDL Processing

Two-Dimensional Cloud Probe (2DC)

• 2D-C Processing

Related Web Sites

• ADPAA Source Forge Site
• UND Airborne Wiki
• David Delene's ADPAA Software Article