.:citationwinds:M300: Difference between revisions
Daviddelene (talk | contribs) No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
=Post-flight Data Processing Scripts= | =Post-flight Data Processing Scripts= | ||
==process_raw== | |||
'''Purpose''' | |||
Extracts analog data from SEA M300 data system file (*.sea) and creates the *.analog.raw file. Extracts Cloud Imaging Probes (CIP) housekeeping information from SEA M300 data system file(*.sea). | |||
'''Required Input File''' | |||
<nowiki>*.sea</nowiki> | |||
'''Output File''' | |||
<nowiki>*.analog.raw</nowiki> | |||
<nowiki>*.housekeeping.cip.raw</nowiki> | |||
==analog2physical== | |||
'''Purpose''' | |||
To convert analog measurements from engineering units (voltages) to physical units (i.e. degree C). | |||
'''Required Input File''' | |||
<nowiki>*.analog.*</nowiki> | |||
'''Output File''' | |||
<nowiki>*.physical.raw</nowiki> | |||
==convert_physical== | |||
'''Purpose''' | |||
Uses total temperature, static pressure and dynamic pressure to correct for dynamic effect on the total temperature measurement to calculate air temperature. | |||
'''Required Input File''' | |||
<nowiki>*.physical.*</nowiki> | |||
'''Output File''' | |||
<nowiki>*.basic.raw</nowiki> | |||
==winds_file== | |||
'''Purpose''' | |||
'''Output File''' | |||
<nowiki>*.winds.raw*</nowiki> | |||
=Processing References= | =Processing References= | ||
Revision as of 22:58, 11 April 2016
Citation Research Aircraft Atmospheric Winds (Aircraft Processing)
Calibration Data Processing Scripts
Post-flight Data Processing Scripts
process_raw
Purpose
Extracts analog data from SEA M300 data system file (*.sea) and creates the *.analog.raw file. Extracts Cloud Imaging Probes (CIP) housekeeping information from SEA M300 data system file(*.sea).
Required Input File
*.sea
Output File
*.analog.raw
*.housekeeping.cip.raw
analog2physical
Purpose
To convert analog measurements from engineering units (voltages) to physical units (i.e. degree C).
Required Input File
*.analog.*
Output File
*.physical.raw
convert_physical
Purpose
Uses total temperature, static pressure and dynamic pressure to correct for dynamic effect on the total temperature measurement to calculate air temperature.
Required Input File
*.physical.*
Output File
*.basic.raw
winds_file
Purpose
Output File
*.winds.raw*
Processing References
http://aerosol.atmos.und.edu/ADPAA/winds/index.html
Lenschow, D. H., 1986: Aircraft measurements in the boundary layer. Probing the Atmospheric Boun.-Layer Meteor., D. H. Lenschow, Amer. Meteor. Soc., 39–55.